Colorbond steel is a minimum of 0.42BMT (Base Metal Thickness) Professional Choice will usually use Colorbond of 0.48BMT.

It is very common for cheap shed builder to use imported sheeting that is less than 30BMT. A pair of scissors can easily cut this because it is so thin.

Also important to note:– The thickness of steel that Colorbond sheeting must be attached to is a simple, easy-checked point. Most sheds use TRIMDEK or CUSTOM ORB roofing sheets, or they use a Chinese import. These materials are screwed onto purlins with a base metal thickness (BMT) of 0.75mm or less.

The manufacturer specifies that the sheeting must be attached to a minimum thickness of 1mm BMT. Unless the framing is very close (400mm-450mm which is unlikely on most sheds), they do not meet manufacturer specification. They are therefore not meet NCC compliance – no matter what the engineering certification says.

Use the Shed Health Test

No one wants a sag in their roof. The roof deflection indicates the “sag.”. High tensile Australian steel is a lot less ‘bendable’ than mild steel imports. It’s easy to check the structure you are thinking of purchasing on this independent website www.shedhealthtest.com.au. We doubt any other shed supplier would encourage you to use this excellent tool!

These are just some points as to why Professional Choice® is your guarantee that your new installation will meet all manufacturing and Australian standards.

The unique design and engineering software used, ensures we’re able to customise your carport or shed to the millimetre. There is absolutely no waste yet our sheds are up to 40% more in mass. If a comparable size shed is less mass than Professional Choice, you should know there is a problem!

Engineers design each project specifically for your site to ensure its ability to withstand the unique conditions. You’ll have peace of mind knowing that the winds will not damage them.

You have over 43 choices and accessories with Professional Choice Sheds®.

These range from the obvious – dimensions and colour – to solar-ready roofs and mezzanines. Have a look at your shed guide by clicking here.

It’s amazing how many photos and videos we see of damaged sheds after violent storms. This should NEVER happen unless the shed is very old and decaying. It happens because they should never have been certified to Australian Standards.

Fire, Flood and Wind are the three weather conditions all Australians must consider. We can absolutely guarantee Professional Choice against any wind conditions. In most cases, it is highly likely your Professional Choice structure will withstand the ravages of flood. Finding steel that will not distort and bend in the heat of an Australian bush fire is still beyond even Professional Choice®.